Set Up Card Reader
Once a reader is set up you can accept payments with it at checkout.
Selecting a card reader
Section titled “Selecting a card reader”Boniquo works with Stripe’s smart readers: the ones with their own screen and internet connection.
| Reader | Best for |
|---|---|
| Stripe Reader S700 | A counter or a station. Works over Wi-Fi or Ethernet (with its dock). |
| Stripe Reader S710 | Same as the S700 but also with 4G connection. |
| BBPOS WisePOS E | No longer sold, however if you already have one you can continue to use it |
Card readers can not be shared between Stripe accounts.
Ordering a reader
Section titled “Ordering a reader”Order from Stripe, so the reader arrives with Stripe’s payment software and keys already on it.
-
Open your Stripe account
Section titled “Open your Stripe account”On the Payments page click Open Stripe. For a location with its own Stripe account, choose the location first.
-
In Stripe, open Terminal (also shown as Readers) and click Shop. Choose the reader, and a physical test card if you want to try a payment before taking a real one.
-
Deliver it to the venue
Section titled “Deliver it to the venue”Readers ship to a street address, not a PO box. Stripe emails you when the order ships.
If Shop is not shown in your Stripe account, contact Boniquo support and we will order the reader and have it shipped to you.
Pairing a reader
Section titled “Pairing a reader”-
Connect the reader to the internet
Section titled “Connect the reader to the internet”Turn the reader on and join it to your venue’s Wi-Fi, or plug it into Ethernet. The reader needs to reach the internet; it does not need to be on the same network as your phone, tablet or computer.
-
Generate a pairing code on the reader
Section titled “Generate a pairing code on the reader”- Stripe Reader S700 / S710: open Settings from the screen and choose Generate pairing code.
- BBPOS WisePOS E: swipe in from the left edge of the screen, choose Settings, enter the admin PIN 07139, then Generate pairing code.
The reader shows three words, such as
elegant-orca-knife. -
Pair it in Boniquo
Section titled “Pair it in Boniquo”On the Payments page open the Card readers tab and click Pair a reader. Choose the location the reader is at, type the three words, give the reader a name the till will show (for example Front desk), and click Pair reader.
The reader appears in the table with its model, serial number and whether it is online. Repeat for each reader.
Pairing records Pair a card reader as how you take cards in person, or A card reader and the Stripe app if you had chosen Tap to Pay in the Stripe app: the two work together, and checkout asks which is taking the card.
A pairing code expires after a short while. If Boniquo says the code is not recognised, generate a new one on the reader and try again.
Bringing a reader from another platform
Section titled “Bringing a reader from another platform”A Stripe smart reader you used with another booking platform can be paired to Boniquo, as long as:
- It is one of the readers above (a Stripe or BBPOS smart reader, not a Bluetooth one);
- You own it, rather than renting it from the other platform;
- If you bought it in another country, check it is compatible with Stripe in your country.
Generate a pairing code on the reader and pair it as above. Pairing moves the reader to your Boniquo Stripe account, so do it only once you are ready to stop taking payments on the old platform; the old platform can no longer use it afterwards.
Renaming and removing a reader
Section titled “Renaming and removing a reader”On the Card readers tab, click the pencil beside a reader to rename it. Click the bin to mark it for removal, then Delete in the bar below the table.
Removing a reader takes it off your Stripe account. It shows a fresh pairing code the next time it is asked for one, so it can be paired again, to you or to someone else. Remove a reader before selling it or returning it.